2000 Ingersoll Rand ECM590
- Equipped with YH80A Drifter - Unit needs nothing is currently running on a job at this time. - Has newer paint job - Manual rod changer - Long boom Condition: UsedLes Location: John HallCurrency: USDList Price: 50,000.00
1999 Ingersoll Rand ECM590
- Equipped with YH80A Drifter -Only known issue is the engine Boggs down under a hydraulic pressure load everything works as intended but noticeable lack of performance due to lower engine rpm's . Possible fuel issue -Paint is less than a year old -Manual Rod changer Condition: UsedLes Location: John HallCurrency: USDList Price: 40,000.00
2004 Ingersoll Rand ECM590
- Comes with YH70 not currently installed but will be mounted for transport - This unit has tracking issues will move but unknown if it's the final drives or hydraulic motors. - Hammer needs to be mounted back on the machine - Fuel stop solenoid is inoperable - Dust collector needs to be reassembled Condition: … Continue reading "2004 Ingersoll Rand ECM590"
2004 Ingersoll Rand ECM590
- Equipped with YH80A Drifter - Mechanic believes there is a broken pin in the fuel injection pump machine will idle but will not idle up. - Other repairs needed are inoperable fuel stop solenoid Condition: UsedLes Location: John HallCurrency: USDList Price: 50,000.00
2006 Ingersoll Rand ECM590
- Equipped with YH80A Drifter - Repairs needed or in the process of being repaired - Dust collector top new part has been fabricated need's installed - Rod changer arm is broken have new parts to replace purchased from Larmee equipment - Fuel stop solenoid inoperable - This machine has one new track idler pulley … Continue reading "2006 Ingersoll Rand ECM590"
2003 Ingersoll Rand ECM590
- Comes with YH70, not currently installed but will be mounted for transport - Batteries need charging or replaced so could not stand machine up at time of photos. - Missing wall and doors need to be reattached - Fuel stop solenoid is inoperable - Hammer needs to be reinstalled - This machine has a … Continue reading "2003 Ingersoll Rand ECM590"
2005 Ingersoll Rand ECM590
- Equipped with YH80A - Ready to work - Repairs needed are inoperable fuel stop solenoid Condition: UsedLes Location: John HallCurrency: USDList Price: 65,000.00
1997 Ingersoll Rand ECM590
- Equipped with YH80A Drifter - Ready to work - Repairs needed are one door with broken hinges - Fuel stop solenoid - This machine has a new air end and has less than 200 hours on hydraulic pump Condition: UsedLes Location: John HallCurrency: USDList Price: 40,000.00
2000 Ingersoll Rand ECM490
- Cummins 6CT8.3 - Tier 2 - 200CFM/140PSI Air - YH70 Drifter - Setup for T38 - 12,667 engine hours - Drifter Rebuild @ 12,518 Hours - New feed chain & sprockets @ 12,348 hours - 1,000 hour service done @ 12,667 hours Condition: usedLes Location: John HallStock Number: 4392Currency: USD
2005 INGERSOLL-RAND ECM660 III – STOCK# 4379-A
Montabert HC160 Drifter Setup for T45 Cummins Diesel Engine Unit shows 2,307 engine hours, we estimate approximately 12,307 total frame hours 3,949 Percussion hours Condition: usedLes Location: John HallCurrency: USDList Price: 55,000.00
